Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mit-eddie!uw-beaver!rice!sun-spots-request
From: mcvax!etana.tut.fi!pl@uunet.uu.net (Lehtinen Pertti)
Newsgroups: comp.sys.sun
Subject: Re: Second XYLOGICS in 3/160, not recognized
Keywords: Hardware
Message-ID: <7124@etana.tut.fi>
Date: 19 May 89 12:09:22 GMT
References: <1758@suned1.UUCP>
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 19
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 7, Issue 303, message 5 of 12

> There's an extra board next to the original controller that we
> can't identify.  It's in slot 7, where the first controller normally goes
> .... the first (original) controller is slot 8, and we installed the second
> controller in slot 9.  Does that sound right??  Anyway, now the machine
> can't find either disk drive.

Slot 7 is SCSI-slot and usually SCSI controllers are there.  We have (on
3/260) problems with Ciprico SCSI controller, because it shadows second XY
(EE48).  This happens when ciprico is configured according to instructions
on release notes for driver.  This is one possibility for your problems.

We shifted the SCSI-controller up in memory and, it's now ok.

					Pertti Lehtinen
					pl@tut.fi
pl@tut.fi			
Pertti Lehtinen			
Tampere University of Technology
Software Systems Laboratory