Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!apple!sun-barr!texsun!texbell!merch!cpe!hal6000!trsvax!earl From: earl@trsvax.UUCP Newsgroups: comp.sys.tandy Subject: Re: <616@pacsbb.UUCP> Message-ID: <193300133@trsvax> Date: 22 May 89 13:37:00 GMT References: <616@pacsbb.UUCP> Lines: 43 Nf-ID: #R:pacsbb.UUCP:616:trsvax:193300133:000:1864 Nf-From: trsvax.UUCP!earl May 22 08:37:00 1989 In article <616@pacsbb.UUCP> lgarcia@pacsbb.UUCP (Barrio) writes: !I seem to have a serious problem when printing on a DMP2100P using !WINDOWS/386 on a Tandy 4000. The printer is set to IBM emulation and !I selected the IBM Graphics printer driver. The output is just an !endless row of 6s or Qs. Even if I select the Generic/Text only !printer driver, the result is the same. !Needless to say, I have not experienced anything similar with any !other program. The printer worked fine with Windows 1.x using another !computer. !A call to Microsoft produced no results. A call to Tandy produced !a promise to call back with an answer, which did not materialize. !Any help will be greatly appreciated. ! Luis M. Garcia-Barrio I have the EXACT same problem running Windows 2.03 on my Tandy 1000SX and a Tandy DMP430 printer. Oddly, it works fine on a Tandy 3000NL w/ DMP440. I have to experiment switching printers around to see if the problem is in the printer or the computer. andyross@ddsw1.MCS.COM, killer!igloo!andyross ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I run Windows/286 v.2.1 on my computer at home. It works great with my DMP430 which I own. I haven't had any problems at all, except for when I somehow (one day) had the dip switch setting wrong for Tandy graphics instead of IBM graphics. *********************************************************************** Earl W. Bollinger @ "You were in the Clone Wars!", said Luke excitedly. "Yes", replied Obi Wan, "I was a DOS programmer. But that was before the dark times, before OS2."