Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!bellcore!texbell!merch!cpe!hal6000!trsvax!reyn
From: reyn@trsvax.UUCP
Newsgroups: comp.sys.tandy
Subject: Re: Tandy 3000HL Questions
Message-ID: <193300135@trsvax>
Date: 25 May 89 13:45:00 GMT
References: <1995@gmu90x.UUCP>
Lines: 16
Nf-ID: #R:gmu90x.UUCP:1995:trsvax:193300135:000:663
Nf-From: trsvax.UUCP!reyn    May 25 08:45:00 1989


Regarding your 3000HL,

I used the original 3000HL for about two years before I got the 4000 I'm
using now.  I never had any problems with any of the video cards we shoved
in it, and those ranged from CGA to Hercules to EGA to VGA.

The 3000HL is a true clone as far as the bus goes, the 16 bit slots are the
same as an IBM-AT electrically. You should be able to use anybody else's
cards and peripherals with little or no worry.  If they don't work in a
3000HL, then they probably don't work in 90% of the IBM compatibles on the
market.

                                                  John Reynolds
As usual, the above information and opinions
are my fault.