Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!sun-barr!texsun!letni!doug
From: doug@letni.LawNet.Com (Doug Davis)
Newsgroups: comp.sys.tandy
Subject: Re: Tandy/Radio Shack Printers
Keywords: Tandy, DMP-200, CGP-220, Printers
Message-ID: <3421@letni.LawNet.Com>
Date: 29 May 89 20:15:21 GMT
References: <1994@gmu90x.UUCP> <1420@bucket.UUCP>
Reply-To: doug@letni.LawNet.Com (Doug Davis)
Organization: LawNet Inc.  Texas R&D Offices
Lines: 21

In article <1420@bucket.UUCP> leonard@bucket.UUCP (Leonard Erickson) writes:
>The problem is best described by reffering to my DMP-2100. This printer is 
>for all practical purposes, a Toshiba (p-351?) with A DIFFERENT SET OF ROMS!
>The ROMs are the problem. Tandy printers without IBM emulation modes are
>essentially useless for graphics except with software that supports Tandy
>grapics. 

Gosh, IBM printers without Tandy emulation modes are essentially useless
for graphics, expect with software that support IBM graphics.

Remeber folks, Tandy had the "Tandy" standard long before PC's were a
gleam in IBM's eye. 


Now will someone tell me how to make my 2Mhz model 4 run at four, "Just
by raising a pin." ;-)

doug
---
Doug Davis/LawNet/1030 Pleasant Valley Lane/Arlington/Texas/76015/817-467-3740
{sys1.tandy.com, motown!sys1, uiucuxc!sys1 lawnet, killer, texbell} letni!doug