Path: utzoo!yunexus!sis!doug
From: doug@sis.UUCP (doug berry)
Newsgroups: comp.unix.ultrix
Subject: Ultrix 3.0 - Reverse LAT on DECserver 100's - help
Summary: no such device or address
Keywords: LAT DECserver-100 print
Message-ID: <559@sis.UUCP>
Date: 23 May 89 14:44:55 GMT
Article-I.D.: sis.559
Reply-To: doug@sis.UUCP (doug berry)
Organization: Sheridan College, r&d woodshed
Lines: 24


i've tried:
    lcp -s -h /dev/tty35:AUNT:SISPRINT
  tty35 is not enabled in /etc/ttys, setup on AUNT as per manual.
  cat >>/dev/tty35  returns...
  no such device or address

and then:
    reboot, make entries in /etc/printcap for LAT printer
  LAT is started in /etc/rc.local
  lpr -P latprinter  returns
  no such device or address

This system has devices made for lta0 and lta1.
i can run a test on the port defined as SISPRINT and get output.

Am i doing something wrong?
Is this supported on the 100's?

Help.
-- 
            ...utzoo\                          phone: +1 416 845 9430 x446
uucp: ...uunet!mnetor!yunexus!sis!doug
             ...utai/ attcan/               internet: sis!doug@Nexus.YorkU.ca