Xref: utzoo news.groups:9859 comp.lsi:739 comp.lsi.cad:182 sci.electronics:6364 Path: utzoo!attcan!utgpu!utstat!jarvis.csri.toronto.edu!rutgers!mit-eddie!apollo!kagenski From: kagenski@apollo.COM (Joe Kagenski) Newsgroups: news.groups,comp.lsi,comp.lsi.cad,sci.electronics Subject: Re: A MODIFIED Call for discussion - Proposed VHDL News Group Message-ID: <438d19cf.56ee@apollo.COM> Date: 31 May 89 13:54:00 GMT References: <1989Mar10.173308.549@utzoo.uucp> Reply-To: kagenski@apollo.UUCP (Joe Kagenski) Organization: Hewlett Packard, Apollo Div., Chelmsford, MA Lines: 28 In light of the low postive response for creating a separate VHDL related newsgroup, I'll suggest the following: 1) Best would be to help push for creation of COMP.CAD, this news list would allow for general cad discussions, getting away from the lsi related concrens that have been previously stated. VHDL discussions would be more than appropriate for this news list. If the level of discussion gets high enough on VHDL topics, then COMP.CAD.VHDL could be created then. 2) create a maillist to support a VHDL only discussion. this is not necessarily the best, but it would focus the discussions and may actually allow others to be involved that do not have access to USENET news lists. You could cross-post info from the maillist to USENET, as summarys if deemed appropriate. I personally would prefer to not see it attached to a 'lang' newslist since VHDL isn't a programming language. joe -- Joe Kagenski -CAE Logic Design Tools * ARPA: kagenski@apollo.com Hewlett Packard/Apollo Division * UUCP: {decvax, mit-eddie...}!apollo!kagenski 330 Billerica Road; Chelmsford, Ma 01824 * Voice: 508-256-6600 *FAX: 508-256-2384