Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!husc6!spdcc!dyer From: dyer@spdcc.COM (Steve Dyer) Newsgroups: comp.dcom.lans Subject: Re: Cisco terminal server Message-ID: <3444@ursa-major.SPDCC.COM> Date: 5 Jun 89 02:08:01 GMT References: <3442@ursa-major.SPDCC.COM> Reply-To: dyer@ursa-major.spdcc.COM (Steve Dyer) Organization: S.P. Dyer Computer Consulting, Cambridge MA Lines: 15 In article hedrick@geneva.rutgers.edu (Charles Hedrick) writes: >You indicate that you're going to run SLIP through this. We use >cisco's for SLIP. However there are some limitations, at least in >software release 7.1: I'm thinking of a new product which is supposed to be a combination terminal server/router. Hopefully their router would be using some private synchronous serial protocol to talk with the Cisco on the other end. The box is going to replace my current setup which uses SLIP. -- Steve Dyer dyer@ursa-major.spdcc.com aka {ima,harvard,rayssd,linus,m2c}!spdcc!dyer dyer@arktouros.mit.edu