Path: utzoo!utgpu!utstat!jarvis.csri.toronto.edu!rutgers!apple!ames!think!eplunix!raoul
From: raoul@eplunix.UUCP (Otero)
Newsgroups: comp.dcom.modems
Subject: Telebit Register for Vax Dialin
Keywords: Telebit, Register, Dialin
Message-ID: <749@eplunix.UUCP>
Date: 6 Jun 89 21:36:06 GMT
Organization: Eaton-Peabody Lab, Boston, MA
Lines: 26

Hello again: I posted a few months ago, asking for help setting
up a TrailBlazer Plus/T2000 for a dialin line on our Vax11/750
at work, running BSD 4.3. Then I discovered the unit had a 
hardware fault, sent it back, and now have a replacement.
I've finally gotten around to playing with it again, and could use
some help.

A couple of things are going on. First, it's only for a dialin
line. Second, the previous sys-admin seems to have retained some
4.2 uucp features to make the system work. Third, I do have fax
of the Telebit installation notes for uucp/g networks, so I have
something to work with. Unfortunately, with the weirdness my
predecessor left, /etc/gettytab uses a format similar to /etc/termcap
instead of the format Telebit describes for it, with two-letter
flags like "2|std.9600|9600 baud|sp#9600:" instead of the 
"19200m #B19200 CS* ECHO EXON ....." style. 

So, should I worry about the uucp Entries at all if I'm only using it as a
dialin? Should I lock the speeds, since it's for my boss to use with an
identical unit? What register settings do people with similar systems and
setups use? 
-- 
			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			eplunix!cirl!raoul@eddie.mit.edu