Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!unmvax!gatech!csun1!weyrich
From: weyrich@csun1.UUCP (Orville Weyrich)
Newsgroups: comp.os.minix
Subject: Please help me establish 1.3d baseline
Message-ID: <194@csun1.UUCP>
Date: 2 Jun 89 04:52:09 GMT
Distribution: na
Organization: Univ. of GA, CS Dept., Athens
Lines: 22

I have been upgrading from the original 1.1 tape distribution to the 1.3d
baseline, and appreciate all the help I have gotten so far from the net.

I need just a little more help now: there are several discrepancies between
the crc.final file included in the bugs.nosc.mil d1.2-1.3.tar.Z and what I
have come up with.  Maybe the discrepancies are no problem, but I really 
wanted to have an accurate baseline before I proceed.  If someone could help me
by agreeing to send me the files listed below I would be grateful.

minix/commands/cp.c      should be  3546 bytes but mine is 3520.
minix/commands/dosread.c should be 28473 bytes but mine is 28510.
minix/tools/at_makefile  should be  2249 bytes but mine is 2245.
minix/tools/pc_makefile  should be  2249 bytes but mine is 2245.
minix/doc/lib.doc        should be 39018 bytes but I have no such file.
minix/lib/IBM_PC/prtso.s should be   474 bytes but I have no such file.


-- 
Orville R. Weyrich, Jr.          | UUCP    : ...gatech!csun1!weyrich
Department of Computer Science   | INTERNET: weyrich@csun1.cs.uga.edu
University of Georgia            |
Athens, GA 30602 USA             | MA BELL : (404) 542-1082