Path: utzoo!attcan!uunet!cs.utexas.edu!sun-barr!sun!imagen!atari!portal!cup.portal.com!Brian_C_McBee
From: Brian_C_McBee@cup.portal.com
Newsgroups: comp.sys.amiga
Subject: Re: Lucas Board/Amiga 1000 Problems
Message-ID: <19022@cup.portal.com>
Date: 1 Jun 89 04:08:51 GMT
References: <3397@fmeed1.UUCP>
Distribution: na
Organization: The Portal System (TM)
Lines: 14

One more LUCAS board problem.  Mine works fine with my Supra hard
drive, but wont work with my C Ltd. aMEGa board.  I've grounded my
kickstart daughterboard PALs, grounded the LUCAS ground hole, and
built a bus terminator to go on the end of the expansion bus.  I
terminated the data lines and PRW* LDS* UDS* and AS*.  I haven't
bought C Ltds PAL replacements, would they do me any good?  Would
it help to terminate more of the lines on the bus, say, the address
lines?  I need the RAM expansion 'cause 16-bit compress wont run in
512K (gotta get my news fix every day).

BTW: I am running 12MHz parts at 20MHz with a 7474 for U9.  This
definitely seems to be the best combination.

Does Brad read this group?