Xref: utzoo comp.sys.amiga.tech:5568 comp.sys.amiga:35204
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!unmvax!charon!ariel.unm.edu!csbrkaau
From: csbrkaau@ariel.unm.edu (Jim Banas)
Newsgroups: comp.sys.amiga.tech,comp.sys.amiga
Subject: Disabling the Low Pass Audio Filter on A500/2000s
Message-ID: <5213@charon.unm.edu>
Date: 11 Jun 89 16:46:13 GMT
Sender: root@charon.unm.edu
Reply-To: csbrkaau@ariel.unm.edu (Jim Banas)
Organization: University of New Mexico, Albuquerque, NM
Lines: 13

Can anyone suggest a method to disable the Low Pass Audio Filter
on an Amiga 2000 through hardware?  I do have the PD program to
turn the LED power light on and off (turns the filter on and off)
but I also have a couple of sample music programs that "blink" the
light and therefore continuously disable and enable the filter.

They were meant for an Amiga 1000 (where there is no software method
to disabling it).

I want to be able to disable and enable the filter by a simple method
of adding a jumper, etc. to the board.

Jim Banas