Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!csd4.milw.wisc.edu!leah!rpi!itsgw!brspyr1!tim
From: tim@brspyr1.BRS.Com (Tim Northrup)
Newsgroups: comp.sys.atari.st
Subject: Re: 520STFM
Message-ID: <6033@brspyr1.BRS.Com>
Date: 9 Jun 89 20:31:45 GMT
References: <0508891231500780@dynasoft.UUCP|
Organization: BRS Information Technologies, Latham NY
Lines: 21

From article by dynasoft!john@stag.UUCP (John Stanley):
| [george@electro.UUCP (George Reimer) writes...]
|> 
|> I carefully cleaned out the holes for the four chips, soldered
|> in 4 sockets and then inserted the 256k x 4  drams mailed to me
|> from IC Express, and volia! I had a 1040STfm! 
|> 
| 
|   It's amazing it was that simple...  :^)
| 
|   Even more so when you realize it takes 16 x 256k (bit)
| chips to add 512K bytes of memory...     ==

Read carefully --> 256k x 4!!!! chips --> 4 x 256k x 4 = 16 x 256k

						-- Tim
-- 
Tim Northrup      		  +------------------------------------------+
+---------------------------------+         GEnie:  T.Northrup               |
UUCP: uunet!crdgw1!brspyr1!tim    |   Air Warrior:  "Duke"                   |
ARPA: tim@brspyr1.BRS.Com	  +------------------------------------------+