Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucsd!ames!haven!aplcen!jhunix!ins_bac
From: ins_bac@jhunix.HCF.JHU.EDU (Ajay Choudhri)
Newsgroups: comp.sys.atari.st
Subject: Re: Help with hooking up a SONY DS mechanism
Keywords: SS drive casing and Sony Ds mech
Message-ID: <1904@jhunix.HCF.JHU.EDU>
Date: 12 Jun 89 04:40:41 GMT
References: <1887@jhunix.HCF.JHU.EDU> <899@ultb.UUCP>
Reply-To: ins_bac@jhunix.UUCP (Ajay Choudhri)
Organization: The Johns Hopkins University - HCF
Lines: 22

In article <899@ultb.UUCP> clf3678@ultb.UUCP (C.L. Freemesser (709ITP)) writes:
>In article <1887@jhunix.HCF.JHU.EDU> ins_bac@jhunix.UUCP (Ajay Choudhri) writes:
>>I have just purchased a SONY double sided mechanism (floppy 3.5in drive)
>>and wish to replace my very old super performing SS drives. Does anyone on
>>the net know how I can do such a thing, while using my case. I noticed the four
>>pin plug which I assume is for power...but the plugs for the Sony and the board
>>in side the case are very different..<----HERE's the problem!!
>Rest deleted...
>
>All you have to do is to unplug the adapter board from the old SS drive,
>and plug in the Sony drive.  
 I cant just plug the drive in becasue, the plug in the SONY drive is different
from the plug coming out of the adapter board in the SS drive case...
anyway I know the pinouts to the adaptor board plug but need help finding the 
pinouts for the SONY, or a different method to hook it up...
any help would be appreciated..
  -Ajay Choudhri
Dreamer Extraordinaire...
To fly in two easy steps... 1) jump towards the ground(diving might help)
                            2) miss the ground(not tooo hard)
the author(ok this aint original) takes no responsibility of inconveniences 
suffered by this activity above forementioned..