Xref: utzoo comp.std.c:1275 comp.sys.atari.st:17052
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!sun-barr!cs.utexas.edu!uunet!mcvax!inria!laas!nastassia!ralph
From: ralph@nastassia.laas.fr (Ralph-P. Sobek)
Newsgroups: comp.std.c,comp.sys.atari.st
Subject: Re: Mark Williams C
Summary: Floating Point standard
Message-ID: <381@laas.laas.fr>
Date: 12 Jun 89 12:51:23 GMT
References: <24094@agate.BERKELEY.EDU> <431fba10.14a1f@gtephx.UUCP> <8137@boring.cwi.nl> <8530@chinet.chi.il.us> <13475@haddock.ima.isc.com> <1000@twwells.uucp> <13522@haddock.ima.isc.com> <10361@smoke.BRL.MIL>
Sender: news@laas.laas.fr
Reply-To: ralph@laas.laas.fr	(Ralph P. Sobek)
Organization: LAAS-CNRS, Toulouse, France
Lines: 12


Since the previous postings were discussing what one complier supports
or does not support, I have a simple question.

Is it true that MWC does not support the IEEE floating point standard?
Is it in the queue?  According to our local ST mag (precisely: ST
Magazine), they stated that MWC uses the DEC standard.

Ralph P. Sobek			  Disclaimer: The above ruminations are my own.
ralph@laas.laas.fr			   Addresses are ordered by importance.
ralph@laas.uucp, or ...!uunet!mcvax!laas!ralph		If all else fails, try:
SOBEK@FRMOP11.BITNET				      sobek@eclair.Berkeley.EDU