Path: utzoo!attcan!uunet!mcvax!kth!sunic!chalmers!myab!herder
From: herder@myab.se (Jan Herder)
Newsgroups: comp.unix.i386,comp.sys.ibm.pc
Subject: Problem with Acer Sys-32/20
Message-ID: <465@myab.se>
Date: 1 Jun 89 17:30:16 GMT
Reply-To: herder@myab.se (Jan Herder)
Organization: Myab Gothenburg, Sweden
Lines: 18


    I have an Acer 386/20 that are running Bell Technologies UNIX/386 3.2u. 
On it is an ACE 8 port serial card form Bell Technologies, and a WD1007-WA2
ESDI card.  This configuration seem to work. Resently I tested plugging in
a newer version of the ACE card. With this the Acer resets it self
after just a few characters (10-300) are sent to a terminal. The only
differens between the two ACE cards are that the AT interface are faster,
S and F chips instead of LS. 
    
    Since the ACE card works in lot of machines and some other cards has 
also failed I supect that the AT bus on the Acer is buggy. Does anyone 
know if there is problem with the AT bus on Acer Sys-32/20.

-- 
Jan Herder, MYAB Sweden                    |  Phone: +46 31 18 75 12
Internet: herder@myab.se                   |  Fax:   +46 31 18 28 42
UUCP: 	  uunet!enea!chalmers!myab!herder  |  Address: Dr. Forseliusg 21
ARPA:	  herder%myab.se@uunet.uu.net      |           413 26 Gothenburg