Xref: utzoo comp.sys.att:6650 comp.sys.ibm.pc:29944
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!decwrl!pyramid!leadsv!hashemi
From: hashemi@leadsv.UUCP (Rahmat O. Hashemi)
Newsgroups: comp.sys.att,comp.sys.ibm.pc
Subject: Re: ATT6300+ hard disk--physical reformat??
Message-ID: <6620@leadsv.UUCP>
Date: 9 Jun 89 06:17:59 GMT
References: <92@cameron.cs.duke.edu>
Reply-To: hashemi@leadsv.LEADS.LMSC.COM.UUCP (Rahmat O. Hashemi)
Distribution: na
Organization: LMSC-LEADS, Sunnyvale, Ca.
Lines: 11

In article <92@cameron.cs.duke.edu> rfk@dslrt.uucp (Bob Krick) writes:
>
>I need some information to do a low-level, physical reformat of the hard 

You can use the debug utility.

-g=c800:6 will get you started on the right track.

By the way, interleaf of 4-6 works good.

Good luck.