Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!sun-barr!sun!imagen!atari!portal!cup.portal.com!Fabian
From: Fabian@cup.portal.com (Fabian Fabe Ramirez)
Newsgroups: comp.sys.mac
Subject: Re: SE/30 problem with external SCSI drive
Message-ID: <19018@cup.portal.com>
Date: 1 Jun 89 01:23:09 GMT
References: <107154@sun.Eng.Sun.COM> <327@smsdpg.uu.net> <7598@spool.cs.wisc.edu>
Distribution: usa
Organization: The Portal System (TM)
Lines: 11

Mike,

SCSI termination is the problem.  If the external SCSI device is off, then its
termination circuitry will only function properly when the device is turned on.
Otherwise, try either a long or shorter SCSI cable.

Fabian Ramirez
SuperMac Technology

fabian@cup.portal.com
sun!cup.portal.com!fabian