Xref: utzoo comp.sys.apple:13825 comp.sys.apollo:2859 comp.unix.aux:1024 comp.unix.questions:14224 comp.sys.mac:33307 comp.sys.dec:1385 Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucsd!sdcsvax!celece!markley From: markley@celece.ucsd.edu (Mike Markley) Newsgroups: comp.sys.apple,comp.sys.apollo,comp.unix.aux,comp.unix.questions,comp.sys.mac,comp.sys.dec Subject: Re: Academic workstations -- Followups to comp.unix.questions ONLY Message-ID: <6625@sdcsvax.UCSD.Edu> Date: 12 Jun 89 16:39:52 GMT References: <507@lclark.UUCP> Sender: nobody@sdcsvax.UCSD.Edu Reply-To: markley@celece.UUCP (Mike Markley) Distribution: usa Organization: UCSD Office of Academic Computing Lines: 42 In article <507@lclark.UUCP> cullum@lclark.UUCP (Mike Cullum) writes: > >>We are in the process of considering the purchase of workstations for >>a small lab in our Computer Science Department. Our proposed >>configuration calls for 8 workstations (8Mb RAM, 200+Mb disk, large >>monochrome display) and a server. >>... >>Any advice? > It somewhat depends upon what your overall objective is but here is my $0.02. If you want a distributed file system where you have access to all of your files from any workstation without having to copy them to the local disk buy Apollo workstations. The Apollo file system is IMHO orders of magnitude easier to administer than NFS. The Apollo registery is also easier to set up and administer than Yellow Pages from SUN. In SUNs favor is cost and amount of inexpensive software available. This is becoming less of a factor now that SR10 from Apollo is available. Just configure your machine as a BSD4.3 machine and the compatability questions dim. If you need to develop graphics software the SUN is easier to program unless you go with X-Windows and then the systems are the same. The X11R3 software is much more stable on the SUNs then it is on the Apollos. If you are looking for pure integer performance than SUN is much more cost effective. The SparcStations are very fast in the integer environment. For floating point I would say consider buying a fast server and a bunch of cheap diskless workstations. You can put 2.8Gigabytes on an Apollo DN10000 and then run all of you diskless stations of of this. It is several times faster than the SparcStations for floating-point calculations. My recommendation overall is to go with Apollo. Their workstations are IMHO much easier to take care of and their network is much easier to grow. A single command adds new workstations, and the workstations file system(s), to the network. Mike Markley University of California, San Diego markley@celece.ucsd.edu markley@kubrick.ucsd.edu