Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!purdue!decwrl!nsc!icldata!altos86!ti
From: ti@Altos.COM (Ti Kan)
Newsgroups: comp.unix.wizards
Subject: Re: shl not working
Message-ID: <1173@altos86.UUCP>
Date: 30 May 89 22:42:17 GMT
References: <19764@adm.BRL.MIL>
Reply-To: ti@altos86.UUCP (Ti Kan)
Organization: Altos Computer Systems, San Jose, CA
Lines: 24

In article <19764@adm.BRL.MIL> C463435@umcvmb.missouri.edu (Don Ingli) writes:
>
>My problem:  I can't get shl to work correctly. here is a log of the
>error message and a listing of my /dev/sxt*.
>
>here tis the log..
>don:> shl
>no control channels available (errno=6)

You are probably running a kernel that does not have the SXT module
linked in.  Look at your /usr/sys/system file and if there is no
line that resembles

INCLUDE: SXT

in it, you must edit that file, add the line, and re-configure the
kernel by doing a "make" in /usr/sys.

-Ti
-- 
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
 Ti Kan         vorsprung durch technik!
 UUCP: ...ucbvax!sun!altos86!ti
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-