Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ncar!noao!asuvax!hrc!swusrgrp!jeff From: jeff@swusrgrp.UUCP (Jeff Tye sys adm) Newsgroups: comp.unix.xenix Subject: Re: Caching disk controllers and 386 multiprocessor Summary: DPT is great! Keywords: multiprocessing, disk controller Message-ID: <1216@swusrgrp.UUCP> Date: 4 Jun 89 20:52:11 GMT References: <10@aostul.UUCP> Organization: southwest!/usr/group - Phoenix, AZ Lines: 45 In article <10@aostul.UUCP>, steveb@aostul.UUCP (Steve Bogner) writes: > > I am trying to put together a very high performance SCO Xenix > system and would like to know if anyone out there has had > experience (good or bad) with the caching disk controllers made > by DPT (Distributed Processing Technologies). They say you can > have a hardware cache of up to 16 MB, reducing disk access to .6 > ms. I've been using and selling the DPT caching disk controllers for over a year and a half. I highly recommend the product and the company. The performance benefits are outstanding. I like them so much that I propose them with every system I sell. The difference is like night and day. Some tips on using them: 1) Don't use it unless you have the RAM card with it. 512K is not enough by itself. Trust me. I've tried it in a variety of configurations and 2.5MB cache RAM or more is needed. 2) Lower your disk buffers in Xenix to 256K when using the DPT card. You get more RAM for XENIX that way and the DPT does the rest for you. 3) Use the DPT format utility and *NOT* the Xenix install format. DPT uses a special formatting algorithm that skews the sectors for optimum performance. > Also, a company called Corollary makes a 386 multiprocessing > board for SCO Xenix called the 386/mp. Up to four 386's can be > added to the server. Has anyone actually done this? I'm using > the ALR 33/386 server with 16 MB of 80 ns RAM and Maxtor 4380E > disks. Please reply by e-mail. You must use Corollary's motherboard in order to use their multiprocessing capabilities. The AT buss is too slow for multiprocessing so Corollary created a new AT compatible motherboard with dedicated 'C' buss for memory and data transfers. It is a true multiprocessing buss with cache coherency and all that stuff. Zenith is OEMing the product in their Z10000 (?) line. -- Jeff Tye southwest!/usr/group The Southwest U.S. chapter of /usr/group c/o Copperstate Business Systems voice (602) 244-9391 ncar!noao!asuvax!hrc!swusrgrp!jeff swusrgrp (602) 275-2541