Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!tut.cis.ohio-state.edu!unmvax!gatech!udel!udccvax1!bill
From: bill@vax1.acs.udel.EDU (William Tsai)
Newsgroups: comp.unix.xenix
Subject: Problem with SCO 2.3.1 and Tecmar 60H quarter inch tape
Summary: Controller Card (Type=W) not found...
Keywords: sco, tecmar
Message-ID: <3789@udccvax1.acs.udel.EDU>
Date: 9 Jun 89 18:49:59 GMT
Reply-To: bill@vax1.acs.udel.EDU (William Tsai)
Distribution: usa
Organization: University of Delaware
Lines: 15

Has anybody gotten Tecmar 60H QIC tape drive to work?  I used
'mkdev tape' to install /dev/rct0 using controller type W (and T,
and E, and everything else) but none of them worked.  When boot up,
the system tells me Controller Type W (or whatever) not found.
I called SCO twice, the first time they told me that I have to
remove linker then reinstall it.  The second time (this morning)
they told me that SCO Xenix won't work with 60H at all.  Are 60H
that different from 60AT, 60E, and others??

bill@vax1.acs.udel.edu

-- 
       Bill Tsai
University of Delaware CIS		ARPA:  bill@vax1.acs.udel.EDU
     (302) 738-1716	" The computer doesn't hate everybody - just you... "