Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!pilchuck!ssc!markz
From: markz@ssc.UUCP (Mark Zenier)
Newsgroups: sci.electronics
Subject: Re: HIGH VOLTAGE STUN GUNS'S
Keywords: HIGH VOLTAGE, STUN GUNS
Message-ID: <1944@ssc.UUCP>
Date: 7 Jun 89 21:42:32 GMT
References: <426@aucis.UUCP>
Organization: SSC, Inc., Seattle, WA
Lines: 13

In article <426@aucis.UUCP>, jchan@aucis.UUCP (Jimmy Chanaga) writes:
> I have the schematics to build a stun gun that delivers 75,000 volts at 
> 25,000 watts from an input of 9.8 volts DC. Now my question is, Is there any
> way I can conect two of these stun guns in SERIES and get _________ ??? 

25 Kw, but for how long.  If you hook two of them in series, you'll
probably just get two 75 Kv pulses instead of one.  Sounds like a good
way to puncture insulation but not much else.  Build a Telsa coil, 
they're all sorts of fun.  Pick the right resonant frequency and you 
get to talk to both the FCC and the Coast Guard. In person. ;-)

Mark Zenier    uunet!nwnexus!pilchuck!ssc!markz    markz@ssc.uucp
                            uunet!amc!