Path: utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!tut.cis.ohio-state.edu!purdue!haven!grebyn!scotth
From: scotth@grebyn.com (Scott Hutchinson)
Newsgroups: comp.dcom.lans
Subject: Re: Downloading HP fonts over a Novell Network
Message-ID: <14106@grebyn.com>
Date: 21 Dec 89 15:41:10 GMT
References: <578@cs.columbia.edu>
Reply-To: scotth@grebyn.UUCP (Scott Hutchinson)
Organization: VANCE Systems Inc. Chantilly VA, USA
Lines: 17

In article <578@cs.columbia.edu> benderly@cs.columbia.edu (Dan Benderly) writes:
>I am responsible for a Novell 2.15SFT network with a Hertz 386/25 server,
>and Word Perfect, so it seems to have something to do with Novell.  The same
>setup works on a local printer, as well as on a Lantastic network elsewhere.

	Ok what you need to do is have the print job set up as follows:

	File Contents: Byte Stream
	   Suppress Form Feed : Yes
	 Auto Endcap : Yes
	Device = HP Laserjet
	Mode = (re-init) 
	Enable Timeout: Yes
	Timeout count : 5 or so.

	This works on my 2.15 SFT Server with a Laserjet series 2
	downloading fonts from word perfect.