Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!samsung!munnari.oz.au!basser!softway!stephenf
From: stephenf@softway.oz (Stephen Frede)
Newsgroups: comp.sources.d
Subject: Re: v09i047: popi, The Digital Darkroom, Part01/09
Message-ID: <2472@softway.oz>
Date: 17 Dec 89 21:17:00 GMT
References: <2781@basser.oz> <NELSON.89Dec15212512@image.clarkson.edu>
Organization: Softway Pty Ltd, Sydney, Australia
Lines: 21

nelson@sun.soe.clarkson.edu (Russ Nelson) writes:

>I compiled popi using Turbo C.  I used tc and popi.prj.  When I run popi,
>I immediately get two malloc fails.  This also happens if I use tcc and
>the Makefile.

On a PC, run it with "popi -x128 -y128". This should be the default
on a PC at the moment, or better still it should work with the existing
default of 512x512. All these things and more will come in due time.

On a PC, I recommend using a VGA. Support for other adapters will
improve with time. Of course, any and all suggestions and code will
be gratefully received.

			Regards,

				- Stephen Frede

Softway Pty Ltd, P.O. Box 305, Strawberry Hills, NSW 2012, AUSTRALIA
Phone: +61 2 698 2322; Fax: +61 2 699 9174; Telex: AA27987
ACSnet: stephenf@softway.oz	UUCP: ...!uunet!softway.oz!stephenf