Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!brutus.cs.uiuc.edu!ux1.cso.uiuc.edu!ux1.cso.uiuc.edu!uxa.cso.uiuc.edu!bty00298
From: bty00298@uxa.cso.uiuc.edu
Newsgroups: comp.sys.amiga.tech
Subject: Re: A2620, rev.4.2 motherboard (help!)
Message-ID: <230500010@uxa.cso.uiuc.edu>
Date: 16 Dec 89 10:39:01 GMT
References: <519@hrshcx.UUCP>
Lines: 15
Nf-ID: #R:hrshcx.UUCP:519:uxa.cso.uiuc.edu:230500010:000:590
Nf-From: uxa.cso.uiuc.edu!bty00298    Dec 15 21:31:00 1989


It could be that the revision of the motherboard.  I just ran into many
problems trying to get the A2630 to work in my 4.1 motherboard.  Commodore
replied that the board will not function in a revision less than 4.5 and
that I needed to get a 4.5 upgrade.  They also said that the dealer that sold
me the card should do it for only the cost of labor.

This may only apply to the new 2630 since it runs at a higher clock speed.
Hopefully this is of some help.

Brian Yamanaka
University of Illinois at Urbana-Champaign
bty00298@uxa.cso.uiuc.edu

Only one semester left!!!			Happy Holidays!