Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!uakari.primate.wisc.edu!samsung!usc!ucsd!ucsdhub!hp-sdd!hplabs!hpfcso!hpfcmgw!rodc
From: rodc@hpfcmgw.HP.COM (Rod Cerkoney)
Newsgroups: comp.sys.hp
Subject: Re: serial port on HP9000/360
Message-ID: <1080106@hpfcmgw.HP.COM>
Date: 14 Dec 89 17:02:10 GMT
References: <1989Dec12.220931.24207@iex.uucp>
Organization: HP Fort Collins, CO
Lines: 18



	1 - DTR: data terminal ready
	2 - TXD: transmitted data
	3 - RXD: received data
	4 - RTS: request to send
	5 - CTS: clear to send
	6 - DSR: carrier detect
	7 - GND: signal ground
	8 -  CD: carrier detect
	9 -  RI: ring indicator


Hope this helps.

By the way I couldn't find this in any manual either. I had to look it up in
some internal notes that I have. I'll call this to the attention of the proper
documentation specialist(s).