Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!swrinde!ucsd!ucsdhub!hp-sdd!hplabs!otter!hpubrcf!ken
From: ken@hpubrcf.HP.COM (Ken Green)
Newsgroups: comp.sys.hp
Subject: Re: running X from init
Message-ID: <120003@hpubrcf.HP.COM>
Date: 13 Dec 89 09:11:38 GMT
References: <1541@gwusun.gwu.edu>
Organization: HP  UK Response Center
Lines: 18


	This is one solution, not the best now, but doesn't rely on any non
	standard s/w.


is:2:initdefault:
st::sysinit:stty 9600 clocal icanon echo opost onlcr ienqak ixon icrnl ignpar < /dev/systty
bl::bootwait:/etc/bcheckrc </dev/syscon >/dev/syscon 2>&1 #bootlog
bc::bootwait:/etc/brc 1>/dev/syscon 2>&1 #bootrun command
cr::bootwait:/bin/cat /etc/copyright >/dev/syscon
lp::off:/bin/nohup /bin/sleep 999999999 < /dev/lp & stty 9600 < /dev/lp
lp:2:respawn:/bin/cat < /usr/spool/print > /dev/ser_think 
rc::wait:/etc/rc </dev/syscon >/dev/syscon 2>&1 #run com
pf::powerfail:/etc/powerfail 1>/dev/console 2>&1 #power fail routines
mu:2:wait:/etc/multi_user 0</dev/syscon 1>/dev/syscon 2>&1 #multi_user environment setup
co:1456:respawn:/etc/getty console H 
X0:2:respawn:env PATH=/bin:/usr/bin/X11:/usr/bin xinit -L =+512+300 ttyqf -- :0
r3:3:respawn:/etc/getty ite H