Xref: utzoo comp.graphics:9041 comp.sys.ibm.pc:40295 comp.sys.mac:44668
Path: utzoo!attcan!uunet!suntc!jh34607
From: jh34607@suntc.UUCP (john howell)
Newsgroups: comp.graphics,comp.sys.ibm.pc,comp.sys.mac
Subject: Re: Mac to DXF converter
Summary: Claris CAD TRanslators
Keywords: DXF
Message-ID: <146@suntc.UUCP>
Date: 19 Dec 89 14:28:56 GMT
References: <7419@hubcap.clemson.edu>
Followup-To: poster
Organization: Deere & Co. Technical Center, Moline,IL
Lines: 22

In article <7419@hubcap.clemson.edu>, mmccann@hubcap.clemson.edu (Mike McCann) writes:
> Does anyone have a program for the Mac or IBM that converts from Mac
> format (PICT or even TIFF and GIF) to DXF format?
> 
> Please send E-Mail if you can help,
> -- 
> Mike McCann       (803) 656-3714   Internet = mmccann@hubcap.clemson.edu 
> Poole Computer Center (Box P-21)       UUCP = gatech!hubcap!mmccann
> Clemson University                   Bitnet = mmccann@clemson.bitnet
> Clemson, S.C. 29634-2803         DISCLAIMER = I speak only for myself.

Claris sells their Claris Graphics Translators that translate between
MacDraw or ClarisCAD and AutoCAD DXF or IGES.


========================================================================
John Howell			uucp:		uunet!suntc!jrh
Deere & Company			MCImail:	360-4047
Technical Center		CompuServe:	[76666,2505]
3300 River Drive		FAX:		(309)765-3807
Moline, IL  61265		Voice:		(309)765-3784
========================================================================