Xref: utzoo comp.sys.mac.hardware:860 comp.sys.mac:44328
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!wuarchive!psuvax1!rutgers!pyrnj!esquire!yost
From: yost@esquire.UUCP (David A. Yost)
Newsgroups: comp.sys.mac.hardware,comp.sys.mac
Subject: Re: Cables for IIci->NEC Multisync 3D monitor
Message-ID: <1682@esquire.UUCP>
Date: 15 Dec 89 15:18:32 GMT
References: <29912@shemp.CS.UCLA.EDU>
Reply-To: yost@esquire.UUCP (David A. Yost)
Organization: DP&W, New York, NY
Lines: 10

In article <29912@shemp.CS.UCLA.EDU> korfhage@lanai.cs.ucla.edu () writes:
>A fellow here just set up his new IIci system using a NEC Multisync 3D
>monitor, and found that their cables won't work.

Perhaps my experience hooking up a Mitsubishi Multiscan monitor
(AUM 1371A) will shed some light.  Connect RGB as usual, then,
and here is the bizarre part:  connect Mac CSYNC to monitor HSYNC.
No other connections necessary.  I couldn't believe it.

 --dave yost