Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!att!mcdchg!ddsw1!karl From: karl@ddsw1.MCS.COM (Karl Denninger) Newsgroups: comp.unix.i386 Subject: Re: Device errors -- on formatting a second disk Summary: Try adding a second controller. Message-ID: <1989Dec20.044304.285@ddsw1.MCS.COM> Date: 20 Dec 89 04:43:04 GMT References: <5609@uhccux.uhcc.hawaii.edu> <654400002@cdp> <1989Dec7.190957.5768@virtech.uucp> Reply-To: karl@mcs.MCS.COM (Karl Denninger) Organization: Macro Computer Solutions, Inc. - Mundelein, IL Lines: 34 In article goldblat@interlan.interlan.com writes: > >I missed the precusor to this thread, so please bear with me.. :-) > >In article <654400002@cdp>, steve@cdp.UUCP writes: >> >> > *** DEVICE ERROR: Uncorrectable data error in sector *** >> > *** Controller 0 (Primary AT Hard Disk), Disk 0 Absolute Sector # nnnnnn > >I get innumerable device errors, but with a "sector not found" error >instead when I try to format my second drive in the system (actually, >the errors spew out if I try to format, verify, or anything else). I >get errors all over disk 0, which I know to be good. > >I've been completely unsuccessful in adding this drive. It's a Seagate >151 (42M) in an Everex 386/25 runing 386/ix 2.0.2 -- everyone here's >puzzled, and it's driving me nuts! Any help will be greatly appreciated.. Try adding a second controller. Recommended: Adaptec 2370 It works great. We have two on the second controller, and one on the primary. A second drive on the primary controller did >not< work; verify would report disk read/write errors on both the new and old units during the verification pass! (grrrrrrr). Me thinks Interactive has some bugs in their drivers. Are you listening Interactive? SCO Unix is looking better all the time...... -- Karl Denninger (karl@ddsw1.MCS.COM, !ddsw1!karl) Public Access Data Line: [+1 708 566-8911], Voice: [+1 708 566-8910] Macro Computer Solutions, Inc. "Quality Solutions at a Fair Price"