Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucsd!brian
From: brian@ucsd.Edu (Brian Kantor)
Newsgroups: sci.electronics
Subject: Re: ESR of copper oxide rectifiers
Message-ID: <10440@ucsd.Edu>
Date: 13 Dec 89 14:46:59 GMT
References: <1989Dec12.022128.3128@tapa.uucp> <3103@tymix.UUCP> <8974@cbmvax.commodore.com>
Reply-To: brian@ucsd.edu (Brian Kantor)
Organization: The Avant-Garde of the Now, Ltd.
Lines: 5

Probably the simplest way to simulate the voltage drop of the old
copper-oxide rectifier is to series several silicon diodes.  That
way you'll have a relatively constant voltage drop despite a varying
load, which a resistor would not give you.
	- Brian