Path: utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!samsung!usc!snorkelwacker!bloom-beacon!bu-cs!polygen!bill
From: bill@polygen.uucp (Bill Poitras)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: How do configure a 3Com card.
Message-ID: <633@fred.UUCP>
Date: 22 Dec 89 19:55:09 GMT
Reply-To: bill@fred.UUCP (Bill Poitras)
Organization: Polygen Corporation, Waltham, MA
Lines: 17


	I have a 3Com card w/o any documentation.  I know its not a 3C501, because
I have one of those with documentation to tell me that its a 3C501.  The card
in question is a full length 16-bit card with jumpers for Memory Address,
I/O Address, DMA channel and interrupt channel.  To the right of the right-most
set of DMA pins (if you look at the board with the bracket on your left)
is a jumper call "TEST". Is this a 3C503 or 3C505?  What do the pins mean.
If nobody can mail me installation intructions, could someone give me the
number/address of 3Com.  The 3C501 card is distributed through SUN, so there
is no 3COM number in it.  Thanks in advance.


+-----------------+---------------------------+-----------------------------+
| Bill Poitras    | Polygen Corporation       | {princeton mit-eddie        |
|     (bill)      | Waltham, MA USA           |  bu sunne}!polygen!bill     |
|                 |                           | bill@polygen.com            |
+-----------------+---------------------------+-----------------------------+