Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!cs.utexas.edu!sun-barr!decwrl!ucbvax!TWG.COM!ljm
From: ljm@TWG.COM (Leo J McLaughlin)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: Wollongong PathWay Client Plus for DOS
Message-ID: <8912271458.aa02649@Obelix.TWG.COM>
Date: 27 Dec 89 22:54:00 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 26

John,

>
>I have had Wollongong Group's PATHWAY CLIENT PLUS for three weeks and have
>yet to see a packet from the redirector make it to the network. The TCP/IP
>utilities (TELNET, etc.) work fine. I have it installed on my NCR PC916
>with a 3COM 3C501 card.
>

Are you seeing NetBIOS name resolution packets? (UDP)

A common error is to misconfigure the PC names (e.g. PC A is phred.twg.com
and PC B is just jojo with no domain added).

>
>LAN MAGAZINE was glad that this package ran in 75K (Nov., p.36). When I
>minimized all parameters, I could only get down to 84K.
>

With a 3c501 board you should be able to get under 77K -- about 5 for the
driver, 17 for TCP/IP, 28 for NetBIOS, and 26 for the redirector.

enjoy,
leo j mclaughlin iii
The Wollongong Group
ljm@twg.com