Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!sun-barr!rutgers!cbmvax!heimat!sneakers
From: sneakers@heimat.UUCP (Dan "Sneakers" Schein)
Newsgroups: comp.sys.amiga.tech
Subject: Re: 360K drive on an AT bridge board
Message-ID: <10360.AA10360@heimat>
Date: 31 Dec 89 04:14:07 GMT
Followup-To: comp.sys.amiga.tech
Organization: Sneakers Computing
Lines: 24

In Message, <860@mindlink.UUCP>, a218@mindlink.UUCP (Charlie Gibbs) writes:

>     I have a 2500 with a 2286 bridge board.  Since I exchange my
>MS-DOS work with machines having 360K floppy disk drives, I've
>tried replacing the 1.2-megabyte drive that came with the bridge
>board with a 360K drive (Teac FD-55BR).  I first just swapped

  Ive replaced my 1.2 meg with a 360K drive also. It works just
  fine except the system will complain unless I set both drive A
  and B to 360K drive(s). Be aware I only have 1 drive connected.
  If I try access drive B, the system hangs. Other than changing
  the physical drive and setting the CMOS I didn't have to change
  anything else and the only bugs are those mentioned above.

  Sneakers

--
                                      ___
     Dan "Sneakers" Schein           ////            BERKS AMIGA BBS
     Sneakers Computing             ////     You've tried the rest,  now try
     2455 McKinley Ave.       ___  ////      the BEST! 80 Megs of 100% AMIGA
     West Lawn, PA 19609      \\\\////            24 hrs @  215/678-7691
                               \\\///
     sneakers%heimat@commodore.com    (or)    uunet!cbmvax!heimat!sneakers