Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!zaphod.mps.ohio-state.edu!van-bc!rsoft!mindlink!a218
From: a218@mindlink.UUCP (Charlie Gibbs)
Newsgroups: comp.sys.amiga.tech
Subject: Re: 360K drive on an AT bridge board
Message-ID: <877@mindlink.UUCP>
Date: 1 Jan 90 02:48:54 GMT
Organization: MIND LINK! - British Columbia, Canada
Lines: 22

In article <10360.AA10360@heimat> sneakers@heimat.UUCP
(Dan "Sneakers" Schein) writes:

>  Ive replaced my 1.2 meg with a 360K drive also. It works just
>  fine except the system will complain unless I set both drive A
>  and B to 360K drive(s). Be aware I only have 1 drive connected.
>  If I try access drive B, the system hangs. Other than changing
>  the physical drive and setting the CMOS I didn't have to change
>  anything else and the only bugs are those mentioned above.

     Thanks for the tip, but unfortunately it didn't help me a bit;
my system still hangs.

     I've spent a lot of time fiddling with this thing now, and I
am one unhappy camper.  I've even begun thinking the unthinkable:
dumping the bridge board and getting a real AT clone.  I don't want
to do this.  Aside from this problem and the gimpy display when
animations are shown (I could always get a VGA board, I guess), the
bridge board does work really well.  Can anyone else please help me?

Charlie_Gibbs@mindlink.UUCP
"My Amiga _is_ a PC!  It says 'Personal Computer' right on the box!"