Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!sdsu!ucsd!ucsdhub!hp-sdd!apollo!dawson
From: dawson@apollo.HP.COM (Keith Dawson)
Newsgroups: comp.sys.apollo
Subject: Re: Can we run Domain/X11 Version 1.0 without TCP/IP
Keywords: Domain/X11, TCP/IP, UDS
Message-ID: <47cb7bf4.20b6d@apollo.HP.COM>
Date: 2 Jan 90 14:19:00 GMT
References: <4493@hydra.gatech.EDU>
Sender: root@apollo.HP.COM
Reply-To: dawson@apollo.HP.COM (Keith Dawson)
Distribution: na
Organization: Hewlett-Packard Company, Apollo Division; Chelmsford, MA
Lines: 23

In article <4493@hydra.gatech.EDU> sl11@prism.gatech.EDU (LIEBESKIND,SUSAN H) writes:

  >We need to install Domain/X11 on a Apollo 4000 running SR 9.7.
  >We do not have TCP/IP running on our system currently.  We
  >want to run the server, client and display all on the same workstation.
  >
  >In the *SR10.x* documentation, it says we can run the server using
  >UDS (Unix Domain Sockets) if TCP is not working correctly.  However,
  >we are running on the earlier OS, and on the earlier version of
  >Domain/X11 as well.  Is this a valid alternative for Domain/X11 1.0
  >under SR 9.7?
  
No, UDS is not supported under SR9.7. When Domain/X11 v1.0 starts up
it initializes only a TCP/IP socket, so you must have TCP/IP installed 
and running to use X at all under SR9.7, even in the local case.

____________________________________________________________   My opinions
Keith Dawson  Hewlett Packard Co.         508-256-0176 x5739   are my own.
              Graphics Technology Division / East  
              300 Apollo Dr.  (CHR.03.DE)
              Chelmsford, MA  01824                      USA   My convictions
              Internet: dawson@apollo.hp.com                   are not for
              UUCP: {mit-eddie,yale,uw-beaver}!apollo!dawson   public display.