Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!brutus.cs.uiuc.edu!ux1.cso.uiuc.edu!ux1.cso.uiuc.edu!uxa.cso.uiuc.edu!krb20699 From: krb20699@uxa.cso.uiuc.edu Newsgroups: comp.sys.apple Subject: Re: Reply to: Using sound files on Info Message-ID: <113300233@uxa.cso.uiuc.edu> Date: 25 Dec 89 10:38:32 GMT References: <8912211757.AK00033@adam.DG.COM> Lines: 31 Nf-ID: #R:<8912211757.AK00033@adam.DG.COM>:-32:uxa.cso.uiuc.edu:113300233:000:1555 Nf-From: uxa.cso.uiuc.edu!krb20699 Dec 24 06:55:00 1989 Written by Bruce_Kahn@DGC.MCEO.DG.COM in comp.sys.apple >CEO comments: >From: Bruce Kahn:VOID >Date: ## 12/21/89 12:55 ## > Mac sound files can only be played by a program that can read them >such as PlaySound or MacCD (both of which are on >Sumex-Aim.Stanford.Edu in the archives some place). If you use Apple >File Exchange, you can 'port' sound files back and forth between >Apple II's and Mac's. I believe that if the sound contains an >80H (hex) on the Mac, you need to change it to a 00H on the Apple >II. Otherwise the sound will be garbage. [...clip...] > Bruce (KAHN@ADAM.DG.COM) I don't think changing $80 to $00 is a solution. A $00 byte in sound files is what makes Mac sounds distort on the IIgs. To convert sound files I change all instances of $00 to $01. This eliminates the distortion while only changing the pitch at these points by 1/256th. Mac and II sounds are identical except for the lack of 'support' of $00 by the IIgs. I'm not sure why the Ensoniq chip doesn't like it, but I heard someone explain why awhile back...something about cancelling all previous sound or the like. InterNet -> krb20699@uxa.cso.uiuc.edu | Ken Brownfield =---------------------------------------------+ Rural Route 4, Box 152 PLATO -> ken brownfield/unialum/cerl | Champaign, IL, 61820 -> brownfield/dialup/cerl |(home) (217) 643-7504 =---------------------------------------------+------------------------------=