Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!sun-barr!decwrl!sgi!donl@glass.wpd.sgi.com
From: donl@glass.wpd.sgi.com (donl mathis)
Newsgroups: comp.sys.sgi
Subject: Re: help needed with distcp
Message-ID: <47023@sgi.sgi.com>
Date: 26 Dec 89 23:23:31 GMT
References: <8912211321.AA00221@avelon.lerc.nasa.gov>
Sender: donl@glass.wpd.sgi.com
Organization: Silicon Graphics, Inc., Mountain View, CA
Lines: 54

In article <8912211321.AA00221@avelon.lerc.nasa.gov>, fsfacca@AVELON.LERC.NASA.GOV (Tony Facca) writes:
> 
> I am trying to install 3.2 from a server on the net.  The machines are properly
> configured (I can read from a remote tape).  I need to know the prom monitor
> command to access the remote distribution directory.  The manual says the format
> should be:
> 
> 	boot -f $tapedevice(sash.ip6) --m     (page 3-14)
> 
> It doesn't specify what tapedevice should be set to.  The remote server is 
> called "avelon".  So I try:
> 
> 	setenv tapedevice bootp()avelon:/dis_directory/
> 
> but this wont work because there is no "sash" program (its called "sa").  I've
> tried every variation I can think of.   The closest seems to be:
> 
> 	boot -f bootp()avelon:/dis_directory/sa --m
> 
> This gives the message I am looking for ("Obtaining /distribution_dir from 
> server avelon"), but complains about inappropriate byte order.  That's
> probably because I can't figure out how to tell it that I want sash.ip6
> 
> I am going to call the hotline, but if anyone has been here before, I'd 
> appreciate a reply. 

I'm not sure what manual you are referring to, but i thought we had the
documentation pretty well straightened out.  Here are a couple of things
you might want to be aware of:

1) When creating the distribution directory, remember that the standalone
tools, including sash and the miniroot, appear only on the eoe1 tape; the
others have placeholder files full of nulls.  You must use "-n" on all but
the eoe1 tape to prevent overwriting your "sa" file with small files full
of zeros.  Check the size of sa in your distribution directory; it should
be something like 15Mb long.  If not, use distcp to reload your eoe1 tape
to get the proper tools.

2) In the proms,

	setenv tapedevice bootp()avelon:/dis_directory/sa

and then
	
	boot -f ${tapedevice}(sash.IP6) --m

being careful to use caps for the IP6 suffix.  That should think for
a minute, and then "dot dot dot" as it copies the miniroot onto your disk,
at which point it will boot automatically and come up in inst.
--

- donl mathis at Silicon Graphics Computer Systems, Mountain View, CA

donl@sgi.com