Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!psuvax1!psuvm!PHOBOS!EPA From: epa@PHOBOS.CIS.KSU.EDU (Eric P. Armstrong) Newsgroups: bit.listserv.i-amiga Subject: Mice Message-ID: <9001111816.AA17183@phobos.cis.ksu.edu> Date: 11 Jan 90 18:16:53 GMT Sender: Info-Amiga List Reply-To: Info-Amiga List Lines: 14 Approved: NETNEWS@PSUVM Gateway Return-Path: A temporary fix for an original Amiga mouse is to take it apart, cut about six inches off of the cable and rewire the cable directly to the board....sometimes this works as the wires can get twisted inside and the connections to the board get loose making contact unstable.... Make sure that you get the cable back into the strain relief....A silicon cement works best for this.... !------------------------------------------------------------------! ! ! ! Eric Armstrong epa@phobos.cis.ksu.edu ! ! ericpaul@ksuvm.ksu.edu ! ! ! !------------------------------------------------------------------!