Path: utzoo!attcan!uunet!tut.cis.ohio-state.edu!pacific.mps.ohio-state.edu!zaphod.mps.ohio-state.edu!usc!cs.utexas.edu!mailrus!accuvax.nwu.edu!nucsrl!telecom-request
From: nvuxr!deej@bellcore.bellcore.com (David Lewis)
Newsgroups: comp.dcom.telecom
Subject: Re: Modeming on Electronic Switch System
Message-ID: <2803@accuvax.nwu.edu>
Date: 11 Jan 90 14:50:47 GMT
Sender: news@accuvax.nwu.edu
Organization: Bellcore, Livingston, NJ
Lines: 21
Approved: Telecom@eecs.nwu.edu
X-Submissions-To: telecom@eecs.nwu.edu
X-Administrivia-To: telecom-request@eecs.nwu.edu
X-Telecom-Digest: Volume 10, Issue 22, message 10 of 10


In article <2736@accuvax.nwu.edu>, ntpdvp1!davel@rti.uucp (Dave Livingston) 
writes:

[specifics omitted]

> ...standards defined by Bellcore...

While we're talking correct terminology... Bellcore doesn't define
standards; Bellcore writes technical requirements.  Committee T1,
CCITT, and ISO write standards, to which Bellcore (and Northern
Telecom/Bell Northern Research, among others) is an active
contributor.

I know what you meant, but the term is actually "Bellcore
Requirements".


David G Lewis					...!bellcore!nvuxr!deej
	(@ Bellcore Navesink Research & Engineering Center)
			"If this is paradise, I wish I had a lawnmower."