Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!wuarchive!swbatl!texbell!vector!attctc!digi!dgault
From: dgault@digi.UUCP (Douglas Gault)
Newsgroups: comp.graphics
Subject: problems with Deluxe Paint II enhanced
Message-ID: <316@digi.UUCP>
Date: 9 Jan 90 16:11:21 GMT
Reply-To: dgault@digi.UUCP (Douglas Gault)
Distribution: usa
Organization: DSC Communications, Plano Tx.
Lines: 19

I have recently acquired a copy (illigitamate, but from the origional disks) 
of DELUXE PAINT II Enhanced for the IBM.    

And have recently come accross a bug. When trying to use the "ARCHED LINE" 
function while in magnification mode (X2 only)... The machine freaks out.

If I try to use the ARCHED LINE in any other magnification factor (ie x3, x4, x8, etc)
it works fine!!! Is this a universal bug or is it just somthing with the set of origionals 
I had. The copy of the program I have is installed on my hard disk from the origional
disk (which I bought and then returned.)

I would appriciate any information on this bug and/or a patch for its repair.!

thanks in advance
  '
        Dougie..

==============================================================
"If at first you don't succeed, Give up and don't be a nut about success!"