Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uwm.edu!rutgers!mcnc!rti!xyzzy!tomcat!clegg
From: clegg@tomcat.rtp.dg.com (Alan Clegg)
Newsgroups: comp.os.minix
Subject: UUPC amd READCLOCK under 1.5.0
Keywords: UUPC READCLOCK 1.5.0
Message-ID: <2124@xyzzy.UUCP>
Date: 11 Jan 90 18:34:40 GMT
Sender: usenet@xyzzy.UUCP
Reply-To: clegg@tomcat.rtp.dg.com (Alan Clegg)
Organization: Data General Corporation, Research Triangle Park, NC
Lines: 22

Has anyone successfully compiled/run UUPC under 1.5.0?  I have compiled
libmodemcap.a and gotten everything
working OK there, but when it attempts to dial, it fails.  When I
attempt to use 'term' at that point,
I have to use E/7 and can't get 8 bit to work anymore.  One change I had
to make was to remove the
definition of ANYP from dial.h (used the one from /usr/include/sgtty.h).  

Also, has anyone gotten readclock to work?  With /dev/port being created
with 'mknod /dev/port b 1 4',
readclock will print all zeros then hard-hang the machine.  I have tried
fixing lib/other/portio.c to open
/dev/port as O_RDWR in both places, but that does not seem to help.

-abc



        Alan Clegg				clegg@dg-rtp.dg.com
	Industry Standard Applications		clegg@verity.uucp
	Data General Corp.			{...!mcnc!verity!clegg}

	   YRAC Rural Fire Department -- Wake County Station 29