Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!portal!cup.portal.com!FelineGrace
From: FelineGrace@cup.portal.com (Dana B Bourgeois)
Newsgroups: comp.sys.amiga
Subject: Re: Problems with VD0: or mount
Message-ID: <25700@cup.portal.com>
Date: 7 Jan 90 07:49:59 GMT
References: <5380@eagle.wesleyan.edu>
Distribution: na
Organization: The Portal System (TM)
Lines: 11

James, the latest VD0: is not always an improvement.  I found that I
couldn't use it on my system (A1000 with Insider 1Meg at C0000) because
it doesn't work properly on memory installed outside the 8 Meg Fast
Ram space.  So I use the old version without any problems.  

I don't know if that is your problem but if you are using the latest
version which works with up to 8 Meg and is written in assembler for
smaller size and speed - and you have C0000 memory.  You might be in 
the same boat I am.

Dana @ cup.portal.com