Path: utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!tut.cis.ohio-state.edu!ucbvax!GALLUA.BITNET!11TSTARK From: 11TSTARK@GALLUA.BITNET (Timothy Stark) Newsgroups: comp.sys.amiga.tech Subject: RS232: Connect null modem cable between Amiga 500 and TI99/4A Message-ID: <9001061902.AA03244@ucbvax.Berkeley.EDU> Date: 6 Jan 90 19:02:00 GMT Sender: daemon@ucbvax.BERKELEY.EDU Lines: 44 Hello users: I want transfer my files between my Amiga 500 and TI-99/4A computers. I talked with guys at GEnie online service and they gave me information. I tried it with null modem adapter or straight RS232 cables from both stores (Electronic Boutique and Radio Shack) but they do not work. I tried it with a lamp cord (connects to pin 2 and 3 on both TI and Amiga connectors in straight) but it still do not work. Does anyone know any good IBM/Amiga-to-TI null modem (RS232) cable that will work very well?? Can you help me? Thanks!! Amiga 500 Connector TI-99/4A RS232 Connector 1 GND Ground 1 GND Ground 2 TXD Transmit Data 2 RD Receive Data 3 RXD Receive Data 3 TX Transmit Data 4 RTS Request to send 5 CTS Clear to send 5 CTS Clear to send 6 DSR Data Set Ready 6 DSR Data Set Ready 7 GND Ground 7 GND Ground 8 DCD Detect Carrier 8 DCD Carrier Detect 20 DTR Data Terminal Ready 9 +12 12 volts 10 -12 12 volts 11 AUDO Audio output 18 AUDI Audio input 20 DTR Data Terminal Ready 22 RI Ring Indicator My TI-RS232 Manual says that DTR is require for operation why that it refuse to work!! I will consider to connect null modem cable with 4 wires: RXD, TXD, DSR, and DTR. Perhaps It will work well. Thanks!! -- Tim Stark * This posting have been posted to Usenet comp.sys.amiga.tech. Timothy Stark Bitnet: 11tstark@gallua.bitnet People/Link: T.STARK Gallaudet University Internet: 11tstark@gallux.gallaudet.edu GEnie: T.STARK1 P.O. Box 1453, 800 Florida Ave., N.E., Washington, DC 20002 "Gallaudet University is the only university for the deaf in the world."