Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!shadooby!samsung!usc!rutgers!orstcs!jacobs.CS.ORST.EDU!throoph
From: throoph@jacobs.CS.ORST.EDU (Henry Throop)
Newsgroups: comp.sys.apple
Subject: Re: 80 Column RGB
Keywords: switches, jumper
Message-ID: <14685@orstcs.CS.ORST.EDU>
Date: 6 Jan 90 06:49:56 GMT
References: <900106001148.108095@DOCKMASTER.ARPA> <2005@psuhcx.psu.edu>
Sender: usenet@orstcs.CS.ORST.EDU
Reply-To: throoph@jacobs.CS.ORST.EDU.UUCP (Henry Throop)
Organization: Oregon State University - CS - Corvallis Oregon
Lines: 19

In article <2005@psuhcx.psu.edu> doug@hcx.psu.edu (Doug Hughes) writes:
>
>   I just purchased an extended 80 col /RGB card second hand. This card
>it genuine apple and I have a few questions about it, since I have never
>ever seen one before. First of all, there are two dips switches on the face
>of the card, but I have no idea what they are for. There is also a single
>jumper near the end of the board. I'd like to know it's purpose too.

The two DIPs on the card are for selecting the text color (similar to 
the gs' control panel), which can be green, blue, orange, or white (?).
Interestingly, inverse text always shows up on a white background, even when
the text color is selected differently.

>doug@hcx.psu.edu			psuvax1!psuhcx!doug


---
Henry Throop
Internet: throoph@jacobs.cs.orst.edu