Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!tut.cis.ohio-state.edu!husc6!husc4!huang
From: huang@husc4.HARVARD.EDU (Howard Huang)
Newsgroups: comp.sys.apple
Subject: Re: APW file to TXT converter
Message-ID: <1187@husc6.harvard.edu>
Date: 10 Jan 90 01:58:13 GMT
References: <4620.25a68232@uwovax.uwo.ca>
Sender: news@husc6.harvard.edu
Reply-To: huang@husc4.UUCP (Howard Huang)
Organization: Harvard University Science Center   Cambridge, MA
Lines: 18

>Recently I ftp'ed a program from husc6.harvard.edu that converts an APW
>file into a TXT file...but the 80-column display is really messed up
>(printing every other column, running over the right edge, etc.)  Does
>anyone know what types of Apples it runs on, or what versions of ProDOS?
>I am using a 1983 Apple ||e (unenhanced) with the Apple Extended 80-cols.
>I have posted the program into comp.binary.apple to make tests possible. 
>
>Paul K. Yue
>PYUE@UWOVAX.BITNET

I downloaded the file and it ran fine on my IIgs (ProDOS 8 v1.8).  Also, 
I remember seeing the program run on a IIc successfully (thanks, Paul!)
The program does use MouseText characters, so maybe that causes a problem 
on your unenhanced //e.  


Howard C. Huang
huang@husc4.harvard.edu