Path: utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!UCONNVM.BITNET!SEWALL From: SEWALL@UCONNVM.BITNET (Murph Sewall) Newsgroups: comp.sys.apple Subject: Re: Communications software for Apple IIe Message-ID: <9001101441.AA20026@apple.com> Date: 10 Jan 90 13:24:00 GMT References: Sender: daemon@ucbvax.BERKELEY.EDU Organization: School of Business - U. of Connecticut Lines: 23 On Mon, 8 Jan 90 08:45:00 GMT you said: >strongly recommend (Kermit and other freeware packages are probably not in >the running--I can't access a BB from which to download the Apple II You can download ZLink (shareware) from the APPLE2-L archive of LISTSERV@BROWNVM and Kermit from KERMSRV@CUVMA or ftp from cunixc.Columbia.Edu ProDOS Kermit is in file AAPPRO.BNS You'll need BinSCII (also in the APPLE2-L archive) to unpack it. If you have Mac Kermit, you can download to the Mac and use the File Transfer Utilitty to transfer to ProDOS format. I believe ZLink requires an enhanced //e, but Kermit and BinSCII do not. >Finally, I'm a Mac user on BITNET. I get the Info-Mac Digest, but I can't >access comp-sys-apple postings, so PLEASE RESPOND TO ME DIRECTLY. Au contraire; send the command SUB INFO-APP to any hand LISTSERV and you'll get the BITNET redistribution of comp.sys.apple (aka info-apple@Apple.Com). In fact, you should send posts to info-apple@Apple.Com, not to comp-sys-apple! /s Murph [Internet] or ...{psuvax1 or mcvax}!uconnvm.bitnet!sewall [UUCP] + Standard disclaimer applies ("The opinions expressed are my own" etc.)