Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!usc!wuarchive!decwrl!shlump.nac.dec.com!TOOK.DEC.COM
From: mattioli@TOOK.DEC.COM (John R. Mattioli)
Newsgroups: comp.sys.ibm.pc
Subject: 386 assembler source wanted (examples)
Message-ID: <7255@shlump.nac.dec.com>
Date: 5 Jan 90 22:45:02 GMT
Sender: newsdaemon@shlump.nac.dec.com
Organization: DIGITAL EQUIPMENT CORP.
Lines: 26


	I'm looking for an example piece of code t3at will put the 386 into
virtual 8086 mode and bring up dos.  A book I have seems to have such a program,
but I'm unable to read it cause I'm blind.  It's taking me forever to get into
this book and get all the info I need.  The direction I'm working in is this. 
I'd like to put the 386 in virtual 386 mode and bring up dos but, before I do,
I'd like to program the debug registers to suspend dos and go back into 386 mode
and service some sort of interrupt routine if a given range of memory is
accessed.  Can I do this?  My plan is to translate direct screen writes into
com-port data. 

	As always, any help would be greatly appreciated. 


-----------------------------------------------------------------
					John Mattioli
	Most improved skier (american blind skiers association 1989)
					and humble to!

(DEC E-NET)	TOOK::MATTIOLI
(UUCP)		{decvax, ucbvax, allegra}!decwrl!TOOK.dec.com!MATTIOLI
(ARPA)		MATTIOLI@TOOK.dec.com
                MATTIOLI%TOOK.dec.com@decwrl.dec.com
(US MAIL)	John Mattioli
		550 King St. LKG2-2/BB9
		Littleton, Ma. 01460