Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!cs.utexas.edu!uwm.edu!uakari.primate.wisc.edu!ames!ncar!tank!cps3xx!gcook
From: gcook@cps3xx.UUCP (Greg Cook)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Procomm 2.4.2 & dumb modem
Message-ID: <5966@cps3xx.UUCP>
Date: 9 Jan 90 22:40:13 GMT
References: <12540@cbnewsd.ATT.COM>
Sender: usenet@cps3xx.UUCP
Distribution: usa
Lines: 15

From article <12540@cbnewsd.ATT.COM>, by rlneal@cbnewsd.ATT.COM (r.l.neal):
> Will Procomm only work in the host mode if it is using
> Hayes compatible modems?  or is something else the problem?

I have a Hayes compatible modem and have yet to get Procomm's (2.4.3) 
host mode to work.  It answers a call occaisonally, and if it does, it
just sits there!  Or it keeps cycling between some dumb messages procomm
has and won't stop (even not connected, when I initiate host mode).

I would appreciate any advice on this also!

=========================================================================
Greg Cook                                Chemistry IS life! 
Michigan State University      Watch for the next generation of Enamines 
gcook@horus.cem.msu.edu              coming to a Journal near you!