Path: utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!bcstec!misty!b-mrda!miller
From: miller@b-mrda.boeing.com (Mark Miller)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Unwanted "/NOI" switch on MicroSoft 5.0
Message-ID: <15160001@b-mrda.boeing.com>
Date: 10 Jan 90 00:00:20 GMT
References: <6768@masscomp.ccur.com>
Organization: Boeing Commercial Airplanes MR&D
Lines: 19


	Check to see if you have an older version of LINK.EXE still in the
path (say, from an assembler or an older version of QuickC or MSC). I had
a similar problem, and I had an old version of link sitting in the path
from installing MASM. If you find an old LINK.EXE, remove it and replace it
with the current one. LINK.EXE is compatible with previous versions. The 
problem occurred because MAKE and CL search the path for LINK, and will run
the first version they find. 

I have no connection whatsoever with MicroSoft.
K
======================================================================
Mark R. Miller                     +    Disclaimer: Opinions expressed  
Boeing Commercial Airplane Co.     +    are mine and mine alone, and    
Seattle, WA                        +    not necessarily those of my     
Internet: miller@b-mrda.boeing.com +    employer.                       
Voicenet: (206) 237-0960           +                                   
                                   +       +++ Phillipians 4:13 +++    
======================================================================